Wind Turbine

Product Details:

The Windi Star 400 is an indigenously developed turbine that is capable of providing 400 Watts output. It is lightweight and compact, and can be easily mounted at various locations. It operates silently and generates power at low wind speeds to meet various requirements in energy starved areas in rural communities, as well as for street lighting.

Key Features:

• Low start up wind speed
• The WS400 provides 400 watts output at only 1400 RPM. Virtually silent operation.
• The WS400 has a unique system which controls its speed even at high wind speeds.

Applications:

• Small homes
• Street lights
• Fishing boats

Wind Charge Controller:

• It is available in 12 & 24 V configurations.
• Microprocessor based smart controller.
• Modular construction.
• Electronic torque control - Auto Braking in case of battery over charge.
• Battery reverse protection.
• Powder coated surface for anti-corrosion.
• Built-in battery reverse current protection.
• Output short circuit protection

Controller Specifications:

• Windi Star 400 wind charge controller comes in 12 V and 24 V configurations.
• Equipped with advanced micro-controller based technology to provide easy access for monitoring and operation for the user.
• When batteries are fully charged controller puts brake on.
• Battery over current protection.
• Dimensions - 250 mm (L) x 305 mm (W) x 135 mm (H) (controller);  200mm (L) x 250mm (W) x 120mm (H) (dump-load)

Product Details:

Wish Energy’s new 400 Watts Vertical wind turbine is an indigenously developed turbine that is capable of providing 400 Watts output. This turbine is among the most efficient wind turbines in its class, capable of generating power at 1.8 m/s wind speeds. With a wide range of functionality and applications such as Rooftop and street light installation, the turbine is leaving its mark as a reliable, efficient Micro Wind Turbine. Vertical wind turbine can be installed on any roof top. it starts generating at 2 m/s. Its aluminium blades are rustproof. it is durable & reliable product. Available in 12 & 24 volt.

Features:

• Low start up wind speed
• Aluminum alloy blades with powder coating. Anti corrosive and anti rusty.
• Low vibraton & low noise (around 45 dB)
• Core-less generator with low torque.
• High cost performance

Product Details:

The WindiStar 4500 is indigenously designed & developed and is a high performance, high powered wind turbine. It is available in both off grid and grid tie configurations. The WindiStar 4500 wind turbine provides a peak power of more than 5kW at a much lower rotor speed resulting in quiet and noiseless operation. It has numerous applications such as in the hospitality sector, remote military bases and island electrification.It is currently undergoing the type test & certification as per IEC 61400 for power performance & for safety & functional test by NIWE (National Institute for Wind Energy) which was formerly known as CWET (Centre for Wind Energy Technology, India).

Key Features:

• Low cut in wind speeds
• Lightweight, rugged design
• Suitable for remote locations installations
• International recognition - CE certification; IEC in progress
• Suitable for standalone or multiple parallel module application to suit different power rating.
• Modular construction for easy installation and dismantling
• State of art architecture providing overcharge protection / load diversion (in auto mode).
• Status monitoring of battery parameters - LCD display on front panel.
• Automatic diversion of power to dump load at battery overcharge / very high turbine speed.
• Ambient operating temperature upto 52 DegreeC

Applications:

• Telecom towers.
• Fuel stations & resorts.
• Rural electrification & farm power and water supply.
• 230V AC mains grid tie roof top installation on high rise buildings.
• Water pumping model is also available (WS4500 with WiSH Energy pump controller can be connected to any 3 phase submersible or surface water pump and can pump water from bore wells of 200/300 ft.)
• Military / Para Military camp power supply.
• Island and lighthouse continuous power supply.

Wind Charge Controller:
The WindiStar 4500 charge controller is an intelligent wind charge controller which provides safe, secure and productive wind generator operation. The controller is capable of monitoring various parameters such as battery voltage, battery charging, load diversion and cumulative energy generation. The controller contains a 3 phase full wave bridge rectifier for converting AC power generated from the wind turbine, to DC power. The Controller is capable of diverting excess power to a dump load as required.

Controller Specifications

• WindiStar 4500 wind charge controller comes in 48V, 96V, 120V and 240V configurations.
• Clear alpha-numeric digital LCD screen with user selectable display options.
• Equipped with advanced micro-controller based technology to provide easy access for monitoring and operation for the user.
• Field adjustable battery voltage set points.
• Energy saving back-light operation.
• Controller diverts extra energy to dump load, when batteries are fully charged.
• Battery over voltage protection.
• Front panel LCD display with the following features > Displays battery voltage, battery charging current, kW and kWh reading, battery UV and OV status. Instantaneous / monthly / average wind speed (in m/s) can also be displayed if anemometer is configured in the controller. > Supervisory password provision.

Product Details:

With our in-depth knowledge of this domain, we are actively engaged in offering an excellent quality assortment of Windistar 2000 Wind Turbine.

Product Details:

The Whisper 200 is one of the most widely recognized Micro Wind Turbines in the world and has its roots in the Whisper turbine design from SWPP (Southwest Wind Power). It has been type tested & certified as per IEC 61400 for power performance & for safety & functional test by NIWE (National Institute for Wind Energy) which was formerly known as CWET (Center for Wind Energy Technology, India). This turbine is among the most efficient wind turbines in its class, capable of generating power even at low wind speeds, with a wide range of functionality and applications. Since its initial launch, over ten thousand Whisper 200 units have been installed globally, leaving its mark as a reliable, efficient Micro Wind Turbine.

Key Features:

• Low cut in wind speeds.
• Lightweight, rugged design.
• Suitable for remote locations installations.
• International recognition - IEC & CE certifications.
• Suitable for standalone or multiple parallel module application to suit different power rating.
• Modular construction for easy installation and dismantling.
• State of art architecture providing overcharge protection / load diversion (in auto mode).
• Status monitoring of battery paramters - LCD display on front panel.
• Automatic diversion of power to dump load at battery overcharge / very high turbine speed.
• Ambient operating temperature upto 52 DegreeC

Application:

• Rural electrification
• Water pumping
• Offshore oil platforms
• Telecom towers
• Rooftop installations
• Pipeline cathodic protection
• 230 V AC mains grid tie (with interface controller & grid tie inverter)

Wind Charge Controller:
The Whisper 200 charge controller is an intelligent wind charge controller which provides safe, secure and productive wind generator operation. The controller is capable of monitoring various parameters such as battery voltage, battery charging, load diversion and cumulative energy generation. The controller contains a 3 phase full wave bridge rectifier for converting AC power generated from the wind turbine, to DC power. The controller is capable of diverting excess power to a dump load as required.

Controller Specifications:

• Whisper 200 wind charge controller comes in 12V, 24V, 48V, 96V, 120V and 240V configurations.
• Clear alpha-numeric digital LCD screen with user selectable display options.
• Equipped with advanced microcontroller based technology to provide easy access for monitoring and operation for the user.
• Field adjustable battery voltage set points
• Energy saving backlight operation.
• Controller diverts extra energy to dump load, when batteries are fully charged.
• Battery over voltage protection.

Front panel LCD display with the following features:

• Displays battery voltage
• battery charging current
• kW and kWh reading
• Battery UV
• OV status
• Instantaneous / monthly / average wind speed (in m/s) can also be displayed if anemometer is configured in the controller. 
• Supervisory password provision.

Product Details:

The Whisper 500 has been recognized as one of the most iconic Micro Wind Turbines globally. It is a popular bulk power supply small wind turbine, and was originally made for US markets. A single Whisper 500 in a good windy area is enough to power a cluster of homes or a small sea side resort. A number of them coupled together can provide electricity for an island community. The Whisper 500 has been type tested & certified as per IEC 61400 for power performance & for safety & functional test by NIWE (National Institute for Wind Energy) which was formerly known as CWET (Centre for Wind Energy Technology, India).

Key Features:

• Low cut in wind speeds
• Lightweight, rugged design
• Suitable for remote locations installations
• International recognition - IEC & CE certifications
• Suitable for standalone or multiple parallel module application to suit different power rating.
• Modular construction for easy installation and dismantling
• State of art architecture providing overcharge protection / load diversion (in auto mode).
• Status monitoring of battery parameters - LCD display on front panel.
• Automatic diversion of power to dump load at battery overcharge / very high turbine speed.
• Ambient operating temperature upto 52 DegreeC.

Applications:

• Telecom towers.
• Fuel stations & resorts.
• Rural electrification & farm power and water supply.
• 230V AC mains grid tie roof top installation on high rise buildings.
• Water pumping model is also available (Whisper 500 with Wish Energy pump controller can be connected to any 3 phase submersible or surface water pump and can pump water from bore wells of 200/300 ft.)
• Military / Para Military camp power supply.
• 230 V AC mains grid tie (with interface controller & grid tie inverter).
• Farm power and water supply.
• Island and lighthouse continuous power supply.

Wind Charge Controller:
The Whisper 500 charge controller is an intelligent wind charge controller which provides safe, secure and productive wind generator operation. The controller is capable of monitoring various parameters such as battery voltage, battery charging, load diversion and cumulative energy generation. The controller contains a 3 phase full wave bridge rectifier for converting AC power generated from the wind turbine, to DC power. The controller is capable of diverting excess power to a dump load as required.

Controller Specifications:

• Whisper 500 wind charge controller comes in 24V, 48V, 96V, 120V and 240V configurations.
• Clear alpha-numeric digital LCD screen with user selectable display options.
• Equipped with advanced micro-controller based technology to provide easy access for monitoring and operation for the user.
• Field adjustable battery voltage set points.
• Energy saving back-light operation.
• Controller diverts extra energy to dump load, when batteries are fully charged.
• Battery over voltage protection.
• Front panel LCD display with the following features >Displays battery voltage, battery charging current, kW and kWh reading, battery UV and OV status.
• Instantaneous / monthly / average wind speed (in m/s) can also be displayed if anemometer is configured in the controller. > Supervisory password provision.
• Dimensions - controller 250 mm (L) x 305 mm (W) x 135 mm (H), dump-load 200mm (L) x 250mm (W) x 120mm (H)

Product Details:

The Windi Star 1500 is an indigenously developed turbine that is capable of providing 1500 Watts output. It is currentlyundergoing certification as per IEC 61400 for power performance, safety & functional test by NIWE (National Institute for Wind Energy) which was formerly known as CWET (Center for Wind Energy Technology, India). This turbine is among the most efficient wind turbines in its class, capable of generating power even at low wind speeds, with a widerange of functionality and applications. It is a reliable and efficient Micro Wind Turbine.

Key Features:

• Low cut in wind speeds
• Lightweight, rugged design
• Suitable for remote locations installations
• International recognition - IEC & CE certifications
• Suitable for standalone or multiple parallel module application to suit different power rating.
• Modular construction for easy installation and dismantling.
• State of art architecture providing overcharge protection/load diversion (in auto mode).
• Status monitoring of battery parameters - LCD display on front panel.
• Automatic diversion of power to dump load at battery overcharge / very high turbine speed.
• Ambient operating temperature from -20°C to 52°C

Product Details:

^{Windistar WS5000 is a high performance, high powered wind turbine which provides bulk power, in off grid configuration. Two such turbines are adequate for a full 10 house village or a tourist resort. The WS5000 compares very favorably with other internationally reputed 5KW/ 6KW wind turbines and provides peak power almost 5.5 to 6 KW at low rotor speed resulting in quiet operation. Latest design anti clogging neodymium  alternator design keeps peak temperature below 55 degree Celsius even at rated output – hence no chance of burn out or short circuit failure. The alternator, rotor & 3 blades are perfectly matched for low rotor speed and damping of both lateral and radial rotor movement resulting in ultra smooth quiet operation at lower than 35 db noise level. Unlike other 5KW/ 6KW turbines which weigh more than 300 KG, the WS 5000 weighs only 113 KG and is designed to fit in the Whisper 500 tower – hence no extra cost of tower and lower investment on tower. Can be installed anywhere, even on building roof or top of mobile phone tower using only a hand powered winch – no cranes required. High quality and strong carbon fibre blades, marine grade powder coat as per ASTM B 117 (1000 Hours salt spray test) & use of stainless steel and electroless nickel coated fasteners & parts allow} 

Additional Information:

• Production Capacity: 20
• Delivery Time: 15 to 20 days
• Packaging Details: Wooden Box